My Build - I blame you lot for this....!

**HiltonSteve** · 26-04-2010

Originally Posted by AdCNC

Thats a nice bit of allow steve, where did you get that from? and looking at the photo has it been faced flat?

Found it.....:whistling:

**AdCNC** · 26-04-2010

lol not at johns then. did you "find it" nice and true faced? :P

**HiltonSteve** · 26-04-2010

No, did not borrow it from John...!lol

Made my entire machine out of the same grade and yes it comes in with a ground finish, really nice to work with.

**John S** · 26-04-2010

He couldn't borrow it from me, he's borrowed everything else there nothing left..........................

.

**HiltonSteve** · 26-04-2010

Originally Posted by John S

He couldn't borrow it from me, he's borrowed everything else there nothing left..........................

.

I'm sure I could find something...

See you Tuesday!

Have you eaten all those hobnobs yet? Tesco are doing them 2 for 1 so can bring plenty round to keep you occupied...:heehee:

**HiltonSteve** · 26-04-2010

Right, drawing attached of proposed hole layout for bed.

Machine should be able to drill most of the holes but won't be able to tap them.

Just the 380 holes to tap by hand then......:confused:

**ptjw7uk** · 26-04-2010

Perhaps he'll except hobnobs in payment! may work out cheaper!

Peter

**Lee Roberts** · 28-04-2010

Na mate just been busy serving the Masses, i have been thinking of you tho

:whistling:

Its the x side plates next, done the drawing just need to mark it up for you and email it.

Have you been trying to get hold of me or somthing ?

**HiltonSteve** · 29-04-2010

Lee, not been trying to get hold of you, just not heard from you for a while. Send me the drawings and I will see what I can do.

**HiltonSteve** · 29-04-2010

Found a kress spindle mount tonight that I had made a while ago so decided to get it mounted on my machine.

Now have my new 1 HP DC spindle which covers 0-7000rpm and the Kress which does 10,000 to 30,000rpm. The kress will only be mounted when I need it for engraving etc but only takes a few seconds to mount, now got the best of both worlds...