My Build - I blame you lot for this....!

[John S]

You must be nuts to run at that kernal speed.

.

[HiltonSteve]

You must be nuts to run at that kernal speed.

.

Had to up the kernal speed because it was limiting the max speed of the motors. At 1/16th microstepping I was set at 3200 steps per mm which meant the max i could get the velocity to was about 460mm / min.

[John S]

Oh sod it, forget it that joke was obviously wasted ......................

[HiltonSteve]

Light bulb just came on....