Thread: 10mm belt nema23
Threaded View
-
27-01-2017 #1
Hi looking for some advice, build a DIY laser cutter, as you now there in no load on the x axis, so they swing fast,
Using 10mm belt 20tooth pulley nema 23 189nm wired parallel giving 4.2 amps, now I've seen some lasers running 500mm second and looks very fast, mine can 800mm second but does not look fast,
Now I can only set steps to 3200 any lower stalls and can only move at about 4mm second, so would changing the motor to smaller nema23 say 2amps 4 wire be better, or should I wire these in series, I used these as they where for a cnc but never used them so were spares,
Thanks for any help guys. Kev
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
10mm belt and nema 23
By kev20009 in forum Belt Drive, Pulleys & TimingReplies: 0Last Post: 27-01-2017, 11:52 AM -
eBay Nema23 Stepper mounts
By Slixxor in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 05-06-2016, 05:02 PM -
Anyone have a UK source for open ended 10mm T5 Polyurethane belt
By cweeks in forum Linear & Rotary MotionReplies: 18Last Post: 19-03-2016, 09:43 AM -
RFQ: RFQ Nema23 stepper mount
By r0bsk1 in forum Projects, Jobs & RequestsReplies: 0Last Post: 15-02-2014, 02:16 PM -
DIY Nema23 Motor Mounts
By Lee Roberts in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 23-08-2009, 06:08 PM
Bookmarks