10mm belt nema23

[JAZZCNC]

Hi Dean,

It would not be advisable to get the am882 drives and a decent toroidal psu (I guess around 60v, you have more experience..)?

I see that he had invested a lot in his build but got stuck with some crap drives, and he only needs two of them.

With 100mm pitch then shouldn't need it. 500Rpm isn't diffcult to reach provided theres enough pulses.

Now what I'm not understanding is the numbers given.? 15.62 for 100mm of movement would suggest close to 205mm pitch with 3200 MS.
So to me there must be ratio going on somewhere.? . . . or the Belts are not T5.?

[paulus.v]

edit: