Quote Originally Posted by dachopper View Post
so I should get another increase going to the max 50.

To clarify gecko tech support told me that 48 volt should be fine to use, and anything up to 50 volt should be fine with this system. IE it is designed and tested to run at higher voltages, and downrated to 50 volts for the consumer to avoid issues and to include a large enough safety buffer. Anything that fails below 50 is an anomaly.
I'll warn you again because don't care what Gecko says, if you run those drives at 50V you will considerably shorten there life.!!

If you can get AM882 for $40 then buy them instantly. Feed them 60v+ and watch your machine dance like never before.