Threading V grooving tool needed

[magicniner]

If you can't find a single groove thread mill you can buy a suitably sized thread mill and grind off all but one set of groove cutters.
In addition to thread mills I use an Iscar MGCH 06 bar with GIQR and GIQL inserts for milling grooves and some thread milling, turning internal and external grooves and some thread turning, tips are available in a range of square groove widths, metric and imperial thread angles, round tip, back-boring etc. so it's not a one-trick pony,

- Nick

EDIT - The Iscar option looks reasonably priced given the linked products, I've paid from £25 to £40 for a bar and £2.50 to £14 for tips from the ever popular auction site.

[howser37]

Thanks Nick, like you say the Iscar option looks reasonably priced considering its versatility, will definitely look into that one thanks.

[John S]

Just grind a three penny lump of High Speed Steel into whatever shape you want.
Don't over think it.

[Boyan Silyavski]

ebay number 381136836082 and he had more of that before. 6 euro each discounted from 50 euro each. You willnot find any better. Hopefully will be the right size for you.

[ptjw7uk]

Boyan,

Not the cheapest with the £12 postage!

peter

[Boyan Silyavski]

Boyan,

Not the cheapest with the £12 postage!

peter

I dont buy singular tools, even from China for that exact reason. I dont remember ever spending less than 50-60 euros per purchase ever. Buy tools for 100 euro and shipping and customs will be 20-30 cents per tool

[howser37]

Hi Boyan, i knew i had seen these bits somewhere before, i have purchased quite a few bits off Drillman but didn't think to check this time. I will certainly be buying a few of them for tapping, but they are of no use for the current task as the depth is only .20 inches and i need to be able to get down about 15 mm ideally for the current job, but thanks anyway as i will need some of those drillman bits at some point