Threaded View
-
10-03-2017 #16
Last Activity: 31-07-2019
Hi,
Something to consider might be a double plate set up when attaching the y-axis. This allows for easier adjustment.
In essence the y gantry sides have a base plate attached to form a y-axis assembly. This can then be bolted to a matching plate that is attached to the x-axis carriages.
See http://www.mycncuk.com/threads/10403...aver/page4/#31 & the following post for a better explanation.
This can be seen in a very recent post of the finished machine here (post #69)
http://www.mycncuk.com/threads/10403...aver/page7/#69
CheersLast edited by Greeny; 10-03-2017 at 08:53 PM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Comments sought on new build: A CNC Router for RC Gliders and Planes
By njhussey in forum DIY Router Build LogsReplies: 817Last Post: 13-04-2020, 05:03 PM -
BUILD LOG: First Build-Steel Gantry CNC - Comments on design wanted
By olaff in forum DIY Router Build LogsReplies: 13Last Post: 06-12-2015, 08:34 PM -
New build – input/comments appreciated
By ngundtoft in forum Gantry/Router Machines & BuildingReplies: 73Last Post: 05-10-2015, 11:38 AM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
noob first build
By japcarmaniac in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 13-03-2012, 11:56 AM
Bookmarks