. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-02-2017 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Tool marks are to be expected to some degree but the raised edge is simply because your spindle is out of Tram. Wider the tool the more it will show how far out your spindle tram is. You've most likely not seen this before due to using smaller tooling but soon as you go wide any errors show up.!

    Getting a mirror Finish is all about feeds and speeds and material along with whole load of other factors like machine ridgidty, coolant etc only thru trial and error will you find the right combination, if at all.! . . No one can give you magic numbers to achive this.
    Last edited by JAZZCNC; 03-02-2017 at 06:00 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How to get this finish..?
    By Wal in forum Metal Finishing Techniques
    Replies: 15
    Last Post: 02-02-2017, 11:08 PM
  2. How to get this finish?
    By andy_con in forum Wood Finishing Tips & Tricks
    Replies: 31
    Last Post: 05-07-2016, 10:53 PM
  3. Face Modelling Software
    By KevinC in forum Computer Software
    Replies: 4
    Last Post: 10-06-2016, 07:10 PM
  4. Front face DIY decals advice ..
    By Fivetide in forum Metal Finishing Techniques
    Replies: 9
    Last Post: 13-06-2013, 11:23 AM
  5. Milling profile and flat face
    By hoezap in forum Tool & Tooling Technology
    Replies: 2
    Last Post: 23-08-2012, 11:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules