Can't Get my New Machine to work

[John S]

Right we now know what a PRT E1500W is. It's the inverter for the machine and not the control box.

Did they supply a Mach setup file with the machine. It should end up blar-blar.xml ?
If so you need to copy this into the Mach3 folder and when you start up, use the icon that says mach3 Loader and select that name.
Try that and let us know.

Where in the country are you ? Someone may be local to you.

[Doddy]

A really obvious question, if none of the motors have worked. The E-Stop isn't depressed, is it? (once pressed it'll lock in place and stop any motor turning - reset by rotating the mushroom knob clockwise). I know it's obvious, but look at the simple things first.

[Kev2960]

Thanks John they didn't supply an xml file just step by step set up of ports and pins, motor etc which I've done and rechecked
I'm in Rugby CV211QB post code I'll see if I find the files
Thanks Kev

[kingcreaky]

I'm just down the road nr Hinckley if your still stuck tomorrow l can pop over if you like.

[Kev2960]

Hello kingcreaky, that would be brilliant thank you so much, if

[Kev2960]

Sorry I got distracted, if we swap emails I'll send you my address
[email protected]

[Clive S]

Kev it's not a good idea to show your email on the forum because of spamming. PM is better