CSMIO-IP A &a Chinese spindle

[JAZZCNC]

Servo's are generally not used by beginners and therefore they assume the person installing them knows what there doing.!!

What control mode have you got it set too.? . . . I suspect it will be position seen as you used Step/Dir before and you want it set to Speed control.

Then looks like P29,P23,P24 could be the PID settings but without rest of manual it's hard to tell.

[D-man]

Servo's are generally not used by beginners and therefore they assume the person installing them knows what there doing.!!

What control mode have you got it set too.? . . . I suspect it will be position seen as you used Step/Dir before and you want it set to Speed control.

Then looks like P29,P23,P24 could be the PID settings but without rest of manual it's hard to tell.

Yeah I get that, but we all have to start somewhere, right? And what a better place to learn than Jazz, sorry I mean MYCNCUK

I believe it's set to analog I will have to double check, I set it up just like your video of yours, where the DRO always know it's position.

Manual can be seen here if you want a quick look
https://www.dropbox.com/s/4tzmmea9ip...81%29.pdf?dl=0




Sent from my iPhone using Tapatalk Pro