Quote Originally Posted by Zeeflyboy View Post
Guys, has anyone got any experience or knowledge of these spindles I stumbled across?

They are 80mm body and 220v/2.2kw/400hz so should be a straight drop in/drop out replacement (ideal as it makes it relatively easy to switch to 24,000rpm spindle if needed for composites etc). The difference is that they are 1,500-12,000rpm which would be a lot more suitable RPM range for milling plastics, foams, metals etc and opens up the potential to look at thread mills, reamers and makes drilling more viable.

Only downside is they are significantly more expensive than the 24,000rpm garden variety... which makes it less appealing to take a punt!

https://www.aliexpress.com/item/Low-...460.0.0.rut9B3
Zeeflyboy, I'm also in search for new spindle and maybe this, permanent torque spindle, will look interesting for you too :)

https://www.aliexpress.com/item/High...999.262.d7v80G

p.s. great build !