El Beast - Initial design phase, comments and critique welcomed!

[Zeeflyboy]

More work done today... Didn't have any suitable materials for the counter bearing plate so got cracking with some of the other stuff!

First up, 6mm spacer for the ball nut mount to make it reach the front plate:










And then on to a big piece (so big it takes up most of my poor little X6's bed!) - the front mount plate

Externally clamped and all the interior parts done




external clamps removed and finished part:




Fitted along with the previously printed plugs. Other large hole will be for ball nut grease port which I'm currently working out the finer details of.




Full up:




Full down: