. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-01-2018 #11
    Zeeflyboy's Avatar
    Lives in Nowhere, United Kingdom.
    Zeeflyboy
    Last Activity: 13-07-2023 Has been a member for 7-8 years. Has a total post count of 440. Received thanks 229 times, giving thanks to others 60 times.
    20"x11.5" I believe, although in theory as long as the material isn't too thick (the slots are quite narrow) you can use the passthrough slots to feed a longer piece of material 20" wide through the machine though I haven't tried obviously.

    I believe the plan eventually is for it to take care of the passthrough automagically using the cameras for alignment and continuation of the pattern but that isn't available yet in the beta software. I believe it can be achieved manually you just need some way of indexing and aligning.
    Last edited by Zeeflyboy; 12-01-2018 at 04:47 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Similar Threads

  1. Initial design advise wanted
    By driftspin in forum Gantry/Router Machines & Building
    Replies: 45
    Last Post: 24-10-2017, 06:55 PM
  2. Initial Design Check Please
    By Gotty101 in forum Gantry/Router Machines & Building
    Replies: 90
    Last Post: 28-02-2017, 07:53 PM
  3. Critique required on y-axis design.
    By Spedley in forum Gantry/Router Machines & Building
    Replies: 2
    Last Post: 06-05-2013, 09:17 PM
  4. About to build CNC miller, need design critique please
    By JW149 in forum Milling Machines, Builds & Conversions
    Replies: 8
    Last Post: 23-04-2012, 09:28 PM
  5. NEW MEMBER: About to build CNC miller, need design critique please
    By JW149 in forum New Member Introductions
    Replies: 1
    Last Post: 22-04-2012, 07:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules