Newbie looking at 6040 (China CNC) for polypropylene 15mm sheet

[Clive S]

Going off what people said, higher voltage the better? So close to the max of the drivers.

As for the drivers, http://www.zappautomation.co.uk/elec...ion/em806.html (buying direct from manufacturer in China)
Steppers, http://www.zappautomation.co.uk/elec...ion/em806.html

Those are 80V drives so run them at about 68V to allow for the back emf. 24-24 v in series = 48 = about 68V dc when rectified.

AM882 drives would be less dosh and just as good.