Newbie looking at 6040 (China CNC) for polypropylene 15mm sheet

[Clive S]

Am I right in saying that when the steppers start up or change direction, they require a lot of amps, but when they are going it is pretty low.
Which is why you are able to get away with lower wattage transformers?

A 625 va trans former will be fine good choice on the AM882

[JOGARA]

Doing an order from TME already, saw they sold toroidals.
http://www.tme.eu/gb/details/tst600w...del/tst600008/

Though it is 600VA not 650VA.
That extra few watts going to make much difference?

[Clive S]

Doing an order from TME already, saw they did toroidals.
http://www.tme.eu/gb/details/tst600w...del/tst600008/

Though it is 600VA not 650VA.
That extra few watts going to make much difference?

That will be fine

[JOGARA]

That will be fine

Awesome! Thanks.

And my caps came yesterday.
https://www.aliexpress.com/item/Free...030086709.html

Might as well shove all 5 on?