Newbie looking at 6040 (China CNC) for polypropylene 15mm sheet

[JOGARA]

Let it rip at full speed.


Had it weld towards the end causing a few problems. Air pressure was low because it has gone 9PM.
Doesn't look like it stuck to the bit that much. I was able to pick it off with my nail.



Ill try it now at 0.5mm DoC at those rates.
Was at 1mm (went off the rule of it being half the width?).

[Zeeflyboy]

Looks a bit better, see my edit just above your last post for some further thoughts.

[JOGARA]

Saw it and will be testing it out tomorrow!


Also, just found a 2 flute 6mm...
Must have come with the machine xD

Might give that ago tomorrow too..


Mobile footage of the last cut.

[Zeeflyboy]

looks pretty good in the video

I found the cutters that came with the machine fairly crap btw

[JOGARA]

looks pretty good in the video

I found the cutters that came with the machine fairly crap btw

Thus why I did not bother with them :p
Ordering a few off shop-apt tonight. Hopefully they will come Wednesday.
Will still try the 6mm they gave us. Worth it.

The only problem with the video was the cooling, which I expected because the compressor was low.

[JOGARA]

This is the latest result.
Forgot to mention that I am not doing a finishing pass yet.

[JOGARA]

Cut my product's case rear end.

Not perfect. Some work to do on the CAM but in terms of output it is great.



Really do need a chamfer bit...