Newbie looking at 6040 (China CNC) for polypropylene 15mm sheet

[JOGARA]

I didn't think to turn the rpm down... Make sense :p

This is what i got in terms of mister.


Though it it either just air or a fire hose...


Got the three flute with the bobbled edges coming tomorrow.
So will get to try that out with the lower rpm on the two flute.
No single flutes for at least two weeks :/

Wonder if the Banggood ones are worth trying. Might have some in their EU warehouse.

[Zeeflyboy]

A mister unit will usually have two feeds going into it, an air line and a coolant line, and will have needle valves on both to vary the mix. They are generally designed to work on venturi but you are better off providing a pressurised coolant flow to them - you'll get bigger droplets rather than a pervasive fog.

I see yours looks to have a hose in the back for coolant but I see no second valve for controlling the flow, only a single valve which I assume is controlling the air flow.

this is the type I'm using http://www.ebay.co.uk/itm/Mist-Coola...8AAOSwUuFWzUwK