Newbie looking at 6040 (China CNC) for polypropylene 15mm sheet

[JOGARA]

Desperately need a way to set offsets on X and Y.

Looked at the Haimer stuff again but even their smallest one is over 100mm long.
The X6 has 85mm of travel in Z so really pushing it I think if I was to get one of those.

Any other options out there?
That TPA2 is still not in stock.

[Zeeflyboy]

if machining metals then all you really need is a rod of known diameter (e.g. 6mm), then you can use probing to find the edges just like the Z-height probe does.

The downside is that it only works with conductive materials, that's one area where a proper touch probe has an advantage.