Quote Originally Posted by jamesgates1000 View Post
Best to buy bigger stock, hold on a few mm and do as much as you can on the first op then turn over and take the back off. The flat Ali bar won't be square so will cause more problems later if you don't square it up. Don't buy from aw either find a big metal supplier like smiths metal centres, it will work out a lot cheaper.
The stuff I was looing at would allow 5mm to be shaved off each side actually (made my part smaller).
Ill contact a few local companies. I have been using AW just for ease. But I have spent nearly £200 this past week which probably would have been a lot less locally xD