Newbie looking at 6040 (China CNC) for polypropylene 15mm sheet

[Zeeflyboy]

Again within reasonable bounds, the depth of the material really isn't hugely relevant to the machine's ability to cut it... as long as a tool in an appropriate diameter and length can be found then it really just becomes a question of number of passes.

That last piece must have taken ages to machine at that speed and depth, but as you can see most of these things will have a stab at alu.

If going the chinese router path, I do recommend you avoid any round or unsupported rails if alu is on your to-do list, having owned both I can say you will have much less frustration if you get one that at least has proper HG20 rails... take a look at omioCNC - they make some of the better chinese routers imo (I own an X6-2200L at the moment, building myself a new bigger badder one mostly for fun). If you wanted to go sans-electronics they would probably sell a bare frame if asked.

This is an example of a 20mm plate cut on my X6-2200L: