Thread: my build
-
31-12-2009 #51
-
31-12-2009 #52
Looks very good - always nice to see the machine move for the first time and do something useful!
-
31-12-2009 #53
tribbles
never did find out any more about that rack contacted ondrives ltd they emailed me a drawing of a rack i filled in the dimensions and sent it back , that was over a month ago never heard back from them
-
31-12-2009 #54
Congrats Jon!
-
22-04-2010 #55
hi
on my y axis i have been using 4 v groove bearings i bought on ebay
http://cgi.ebay.co.uk/V-Groove-CNC-R...Domain_3?hash=
i had a slight wobble at the cutter when cutting and tracked it down to the few mill play in these bearings , preloaded the bearings against the rail but could not eliminate the play, so today two 800mm supported rails and 4 bearings arrived from zapp, these are going to be a big improvement ....
who says scotsmen are mean , why buy proper rails when you can buy 4 v grooves for £26 .....Last edited by jonm; 22-04-2010 at 10:23 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks