. .

Thread: my build

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 03-08-2009 #1
    irving2008's Avatar
    Lives in NW London, gateway to A1 & M1, United Kingdom.
    irving2008
    Last Activity: 17-03-2017 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,849. Received thanks 179 times, giving thanks to others 5 times. Referred 6 members to the community.
    Quote Originally Posted by Kip View Post
    I have no bearing location on mine.....the bearings sit against Al plate as they have no radial loads....a spacer in the middle and a belleville washer and a bolt glued in....Nice glue though ;)
    I can't visualise this... picture needed...
    Reply With Quote Reply With Quote
  2. 03-08-2009 #2
    jonm's Avatar
    Location unknown.
    jonm
    Last Activity: 19-06-2011 Has been a member for 9-10 years. Has a total post count of 89.
    Click image for larger version.  Name: Picture 023.jpg  Views: 581  Size: 42.1 KB  ID: 694

    Click image for larger version.  Name: Picture 025.jpg  Views: 632  Size: 47.4 KB  ID: 695

    Click image for larger version.  Name: Picture 026.jpg  Views: 565  Size: 43.5 KB  ID: 696


    hi guys
    thanks for input ... fixed gantry to sides today, bottom runner in , all feels pretty rigid
    Reply With Quote Reply With Quote
  3. 04-08-2009 #3
    jonm's Avatar
    Location unknown.
    jonm
    Last Activity: 19-06-2011 Has been a member for 9-10 years. Has a total post count of 89.
    going to attempt to grind down screws to 8mm then use skate bearing .. with thrust bearing either side , on evilbay thrust bearings for £1.90 each

    cant find angular contact bearings at 8mm, and magneto bearings are £6 each ....... i am after all scotsman
    Reply With Quote Reply With Quote
  4. 04-08-2009 #4
    jonm's Avatar
    Location unknown.
    jonm
    Last Activity: 19-06-2011 Has been a member for 9-10 years. Has a total post count of 89.
    never mind.. soon be time to iron last years xmas wrapping paper....
    and tippex the cards..
    Reply With Quote Reply With Quote
  5. 07-08-2009 #5
    jonm's Avatar
    Location unknown.
    jonm
    Last Activity: 19-06-2011 Has been a member for 9-10 years. Has a total post count of 89.
    cheers kip
    bag of bearings arrived from " gap bearings " today...
    will feed three 12mm bearings on to trapeziod screw fix bearings down with theseClick image for larger version.  Name: p1084241_l.jpg  Views: 502  Size: 5.2 KB  ID: 712 drill on one end , then attack with grinder... sounds so simple....... we will see
    Reply With Quote Reply With Quote
  6. 08-08-2009 #6
    jonm's Avatar
    Location unknown.
    jonm
    Last Activity: 19-06-2011 Has been a member for 9-10 years. Has a total post count of 89.
    Click image for larger version.  Name: Picture 028.jpg  Views: 648  Size: 44.5 KB  ID: 722

    Click image for larger version.  Name: Picture 029.jpg  Views: 589  Size: 59.2 KB  ID: 723

    worked a treat took the threads of with grinder ....last few mil with a file .......
    threaded end for m8 nut
    Reply With Quote Reply With Quote
  7. 08-08-2009 #7
    irving2008's Avatar
    Lives in NW London, gateway to A1 & M1, United Kingdom.
    irving2008
    Last Activity: 17-03-2017 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,849. Received thanks 179 times, giving thanks to others 5 times. Referred 6 members to the community.
    Quote Originally Posted by jonm View Post
    Click image for larger version.  Name: Picture 028.jpg  Views: 648  Size: 44.5 KB  ID: 722

    Click image for larger version.  Name: Picture 029.jpg  Views: 589  Size: 59.2 KB  ID: 723

    worked a treat took the threads of with grinder ....last few mil with a file .......
    threaded end for m8 nut
    I am impressed Jon. How did you jig the grinder to control the attack?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: New Build - For Your Amusement - MK-2 build
    By Karl in forum DIY Router Build Logs
    Replies: 12
    Last Post: 08-02-2017, 08:03 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules