Thread: my build
Hybrid View
-
09-08-2009 #1
Last Activity: 19-06-2011
tribbles
i had the drill in a stand lying on its side and clamped to the bench, because the screw was held with bearings it was running true ... there was no whip in the screw
-
19-09-2009 #2
Last Activity: 19-06-2011
been busy with work.. but found the time to to make a carridge for the gantry... made a mdf one to start...far to much flex so got out the mig pretty pleased with this one very ridgid
-
29-11-2009 #3
Last Activity: 19-06-2011
hi
went to local recycling yard today with some rubbish
and found this aluits 180mm x 90mm
this section is about 1200mm long , the other lenght is 5 meters
long,
(i see a big alu framed router) the bonus is the 6 meters of rack
that was screwed to it, how do i determine the pitch of the rack
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks