Thread: Spindle stopping at 10,000 rpm?
Threaded View
-
24-02-2017 #1
I'm back having problems with a friends Chinese CNC. The spindle (1.5kw water cooled 80mm) seam to stop when I try to make it go over 10,000rpm. If I set it in fusion cam to do 10,000rm its fine however if I set it to 12,000 it does not start. If I set it to 10,000 then start the file and then up the spindle speed in nc studio it also then cuts out so I am thinking its on the vfd side of things.
I don't have much in the way of instructions for the machine so finding it hard to figure much out, any ideas? The pic bellow shows the vfd I'm not sure even what one it exactly is.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
GRBL milling stopping randomly
By Datulab in forum General ElectronicsReplies: 4Last Post: 15-01-2017, 08:52 PM -
Stepper motors keep starting and stopping
By Davo242 in forum Stepper & Servo MotorsReplies: 30Last Post: 03-01-2016, 02:27 PM -
TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
By RoyT in forum Spindles & Drive MotorsReplies: 5Last Post: 29-09-2014, 02:42 PM -
CNC Spindle Repair and Spindle Replacement for any Machine of any Manufacturer
By spindeldoctor in forum Manufacturer NewsReplies: 0Last Post: 13-11-2013, 07:50 PM -
Dolphin Partmaster - what's stopping me from buying a license abroad?
By m_c in forum DolphinReplies: 6Last Post: 27-05-2012, 06:06 AM
Bookmarks