Where Do The Wires Go ?

[Kev2960]

Hi there, i have a new bob but can't seem to figure out what the markings on the board are, my drivers have 3 wires
P 5v D the motor has 3 wires AVI Red Com Black FWD Blue and the fan has 2
The problem is the identification letters on the bob don't make any sense to me can anyone please help

[Clive S]

Hi there, i have a new bob but can't seem to figure out what the markings on the board are, my drivers have 3 wires
P 5v D the motor has 3 wires AVI Red Com Black FWD Blue and the fan has 2
The problem is the identification letters on the bob don't make any sense to me can anyone please help

Kev You need to give more info None of us has crystal balls apart from Dean.
re the driver P = pulse or step 5V is the supply and D = direction.

But what motor are you asking about? put a link up to the manual what is the fan is it 12v etc

[Kev2960]

Hi Clive thanks for the reply, when i read it back it's not that clear.
ill just start with the drivers, i have 3 wires as you've said pulse/step 5v, dir. the terminal blocks on the bob are labeled XN XD XS XE ( i've just put the X axis) am i right thinking XD=direction XS=step, but what does XN & XE mean

[Clive S]

Ok Do you have a link to the bob manual?

[Saracen]

From 2012:

http://www.mycncuk.com/threads/5030-M542-wiring

[Clive S]

From 2012:

http://www.mycncuk.com/threads/5030-M542-wiring

Excellent find see #2 Kev

[Kev2960]

see if this is any use, i have a disc but it only shows what can be connected, like drivers limit sw etc
eBay item number:141871626968

[Clive S]

see if this is any use, i have a disc but it only shows what can be connected, like drivers limit sw etc
eBay item number:141871626968

Kev did you see the link from Saracen the answer is in post two by Dean with the connections