Quote Originally Posted by terry1956 View Post
hi Gary, I have asked the seller for more information. would it be a better long term buy then a 6040 router. michael
There is NO Better with these Chinese machines only trouble long term.!
My advise would be get the suregrave running under mach3 then sell it and buy or build better router if you need to cut rather than engrave.
If they do indeed have drives/motors supplied by gary then chances are at worst case you'll only need Breakout board or best case won't need anything. Just install mach3 and setup it up with correct parameters. Which like I said further down if you provide Pics we can work out what you have and what goes where. This will then give us the parameters you'll need to feed mach3.