Suregrave cnc router

[JAZZCNC]

hi Gary, I have asked the seller for more information. would it be a better long term buy then a 6040 router. michael

There is NO Better with these Chinese machines only trouble long term.!
My advise would be get the suregrave running under mach3 then sell it and buy or build better router if you need to cut rather than engrave.
If they do indeed have drives/motors supplied by gary then chances are at worst case you'll only need Breakout board or best case won't need anything. Just install mach3 and setup it up with correct parameters. Which like I said further down if you provide Pics we can work out what you have and what goes where. This will then give us the parameters you'll need to feed mach3.

[terry1956]

The suregrave is at a dealer who wants nearly twice the cost of a 1640 .I need the work area of a router to cut .5mm sheet brass for making model locomotives. I have better breakout boards and odds and ends from a sieg sx2 conversion I did. Dont really know of any good hobby cnc routers as the market is full of rebadged Chinese machines or overpriced ex school machines.its all abit of a minefield.i dont want to make a machine as my hobby is making model locomotives.michael

[Gary]

What is your budget? i have an early prototype of one of our 10060 machines ready to go and working. Way overkill for what you are doing though.
its used because we used to to help make the parts of our machines we sell.

[terry1956]

Email me your price. [email protected][/email]. with details of chuck spindle etc and of course price.michael

[terry1956]

heard nothing re router so still looking

[terry1956]

Still looking for machine..if anyone who's ego is not more important then helping a customer as a cnc router for sale.please let me know.thanks michael

[Jenny]

Hi I have 1 if you are still looking