Thread: Rails and Series extrusions
Threaded View
-
28-02-2017 #1
Hey Guys.
So a few things..
I noticed my machine had extrusions which where double mounted to make them far taller than needs be.
So today i have taken the extensions off, leaving me with a frame i cant attach to the MDF board.
I presume Sliding nuts / t slots would be fine if i made approximately 5 holes on either side of the 1 meter x 1 meter board?
So having looked at the various types of nuts, i cant seem to work out the extrusion type/series.
The rails i have are 20mm x 80mm.
How can you tell the major differences1?
1
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CNC Router Parts.com rails, V bearings and rails blocks and more
By adamh in forum Classified Ads, Buy, Sell & SwapReplies: 4Last Post: 25-02-2017, 01:31 AM -
BUILD LOG: My first build, Alu Extrusions
By kjetor in forum DIY Router Build LogsReplies: 4Last Post: 28-10-2015, 12:15 PM -
where do you get the v groove channel extrusions from
By nobby in forum Marketplace DiscussionReplies: 1Last Post: 29-04-2014, 04:19 PM -
Steppers, Series, Parallel
By Ricardoco in forum Stepper & Servo MotorsReplies: 14Last Post: 12-01-2013, 08:28 PM -
Mitsubishi FR-D700 Series VFD
By acollins in forum Motor Drivers & ControllersReplies: 4Last Post: 31-05-2012, 07:24 AM
Bookmarks