-
21-11-2017 #11
Alrighty!
Might be an idiotic buy after all ;)
So.. current configuration? Should I match peak or RMS settings on the dip switches?
Have 4amp motors (4nm nema23 from cnc4you)
If going for RMS setting for the driver I get 3.42A RMS 4.78A peak.
If going for peak current I get 3.15A peak 2.15A RMS or a slight overshoot at 4.03A peak 2.88A RMS.
For me this seems like really bad options for maximizing my motors.
I know the AM882/EM806 have software options for fine tuning current but this driver does not seem to have this.
So.. what says the experts? :D
Skickat från min SM-G955F via Tapatalk
-
21-11-2017 #12
I'd set the drives to 4 amps peak?
Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
The Following User Says Thank You to Ger21 For This Useful Post:
-
21-11-2017 #13
-
21-11-2017 #14
I would read the data sheet and set the current to something reasonable. That is science.
Once the machine is running, adjust it so that the motors run at a temperature that is just about as hot as you can comfortably hold, which is around 60C. That is engineering...
Seriously, stepper motors are designed to run hotter than you might expect. More current gives better performance as long as you do not overheat them. Those current readings are really only a guide or a rough starting point, not absolute limits. Remember to set the stationary holding current to half (usually a dip switch setting) which helps keep them a little cooler while not moving.Last edited by Neale; 21-11-2017 at 06:11 PM.
-
The Following User Says Thank You to Neale For This Useful Post:
-
21-11-2017 #15
-
01-04-2018 #16
-
01-04-2018 #17
Oh let me get back to you in a couple of months :D
Im just starting to learn my router.
What I do know is that they move my motors and I haven't had any issues (yet). Would the machine move faster/cooler/quieter with am882s.. I have no idea!! :)
I bought 2 drivers first with the plan of buying 2 am882s for my dual motor axis but in the end I ordered 2pcs of 2dm860s more. The first two I got had metal casings. The last two had metal bottom and heatsink but plastic cover :)
Skickat från min SM-G955F via Tapatalk
-
The Following User Says Thank You to Nr1madman For This Useful Post:
-
02-04-2018 #18
-
The Following 2 Users Say Thank You to JAZZCNC For This Useful Post:
-
02-04-2018 #19
-
02-04-2018 #20
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Windows 10, is it better than the rest?
By magicniner in forum Computer SoftwareReplies: 24Last Post: 28-11-2019, 11:04 AM -
CNC Project - Guitar Neck (and the rest if I can get away with it)
By Washout in forum Woodworking Project ShowcaseReplies: 77Last Post: 28-01-2018, 10:45 AM -
Higher end Chinese controllers?
By m_c in forum Motor Drivers & ControllersReplies: 51Last Post: 22-10-2016, 10:04 PM -
Foot Rest Project and how I did nesting in Fusion 360
By Washout in forum Woodworking Project ShowcaseReplies: 2Last Post: 24-09-2016, 11:57 AM -
NEW MEMBER: Back after a little rest
By bogstandard in forum New Member IntroductionsReplies: 3Last Post: 27-02-2015, 07:12 PM
Bookmarks