Alrighty!

Might be an idiotic buy after all ;)

So.. current configuration? Should I match peak or RMS settings on the dip switches?

Have 4amp motors (4nm nema23 from cnc4you)
If going for RMS setting for the driver I get 3.42A RMS 4.78A peak.
If going for peak current I get 3.15A peak 2.15A RMS or a slight overshoot at 4.03A peak 2.88A RMS.

For me this seems like really bad options for maximizing my motors.
I know the AM882/EM806 have software options for fine tuning current but this driver does not seem to have this.

So.. what says the experts? :D

Skickat från min SM-G955F via Tapatalk