Production grade CNC router Vs Homebuilt CNC router advice

[JAZZCNC]

Jazzcnc - Could you enlighten me on the design flaws of those machines please?

The design flaws are with the Linked machine you showed. Single rail on gantry, Weakly supported gantry, too tall and narrow Z axis, Lack of support on bed frame. These are the main ones which are not little issues and define the machines abilty's.

The other's I won't get into too deep because as caused me troubles in the past but what I will say to you and others "Boyan" need to Look beyond the gloss and the covers then you'll see design issues that shouldn't be there in machine costing this much money.!! . . . . To highlight my point those with experience look at this pic and tell me whats less than ideal.?


On the panel cutting front then it wouldn't be big deal to design Z axis in such way that Saw could be fixed along side spindle so have the best of both worlds.!! .. . . . . . It's all possible with bit of thought and common sense.