Thread: Cutter accuracy
Threaded View
-
08-03-2017 #4
Last Activity: 1 Day Ago
Hi Neale,
Just to check, if you plunge down and just drill a hole, then drop the shank end of a 3mm drill in does it fit? If not does a 2.5mm one fit? That would tell you the diameter of the cutter. If that is off then you will just tell the CAM software the true diameter of the tool (i.e. 2.6mm) and all will be well again.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Bad accuracy with my cnc machine
By masinecc in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 23-04-2015, 06:59 PM -
1mm position accuracy for timing belt
By motomage in forum Belt Drive, Pulleys & TimingReplies: 3Last Post: 01-02-2015, 01:46 PM -
Tool diameter accuracy
By Neale in forum Tool & Tooling TechnologyReplies: 15Last Post: 05-03-2014, 11:18 PM -
Accuracy Problem
By richie00boy in forum Machine DiscussionReplies: 12Last Post: 09-09-2013, 11:24 AM -
Machine bed accuracy
By Colin Barron in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 03-11-2010, 11:24 AM
Bookmarks