Ready to push the button and buy a laser....

**Davek0974** · 09-03-2017

Thanks for the offer Andrew,

I think i'm fairly certain it will need work and I'm ok with that, i like to go through and fine-tune stuff anyway, its a good way to learn all the dodgy parts and i had already spotted those terrible universal sockets - i've got some IEC ones in the CNC building parts box so they will go in pretty much exactly as your one.

I put in an offer tonight, see if they take it or not :)

**Davek0974** · 10-03-2017

Ok, i ordered one this morning, fingers crossed.

Few q's for starters...

Are there any "preferred" sources of acrylic and laser-ply sheet ?

Everyone just use the pump-in-a-bucket cooler, plain water, de-ionised water, any additives?

Two things i will be getting is a 0-50mA meter for tube current and a power measuring probe/device - these seem pretty essential things for starters.

**AndrewMawson** · 10-03-2017

Dave you reckless devil !

I used to use a bucket & pump, but it filled up with dead spiders and flies, and I wanted anti freeze in it as mine is close to a roller shutter door. As the dogs often come and visit me I didn't want poisonous antifreeze in an open bucket - so I got one of the cooler units described in this thread:

http://madmodder.net/index.php/topic,11786.0.html

Apart from having to replace the pump as described in that thread it's been very good.

**AndrewMawson** · 10-03-2017

I've been buying plywood and acrylic from Hindleys

https://hindleys.com/

**Davek0974** · 10-03-2017

Thanks, i'll look out for a chiller type unit, not too bad price on the bay but if it can be got for less then happy days ;)

Hindleys looks good, i seem to recall getting some engraving plastic from them some time ago.

Can't wait.....

**John S** · 11-03-2017

Fancy plastics can be got from 908ltd.co.uk

**Davek0974** · 14-03-2017

And so it starts...

As suspected, delay tactics from the supplier - they are shipping the rotary attachment separately and the DPD tracking is working on that - currently in Oldham?

The machine however is showing fake/unrecognised tracking ref on DHL, I have asked twice for a real ref but they just send the same number and wish me a happy day :(