Crap chinese router problems

[charlieuk]

I would totally agree however its not my machine so hard to do to much. There is a lot I would do to it, add limit switches, replace the board and change to Mach 3 from nc studio, change the z axis and there are no barring blocks on the ball screw! Etc ect

How hard is it to change the board? at the moment I think it will only allow us to use nc studio so changing it would probably solve multiple problems I expect! but this sort of thing is not my strong point.

The pic of the motor mount plate is bellow not sure if it was cad or not but you can see how shocking the holes are and no its not the camera angle making it look worse it was that bad!

The vfd is hl3000-25-t I have a manual I was given I will add the link. A chap on cnc zone has been trying to help but no luck yet, I'm not sure its us doing something wrong or the setting at the moment we have tried all sorts.


https://get.google.com/albumarchive/...5GUjQnN2_s6Odx