Thread: O-ring calculation
Threaded View
-
18-03-2017 #1
Last Activity: 18 Hours Ago
Ok for all you engineers out there.
I have two O-rings one id 6mm & 2mm cross section and another id 7mm & 1.5 cross section.
I have a bore of 10mm and a piston 9.96mm. What size groove do I need in the piston for hydraulic dynamic use (this is for a powered draw bar) the piston will move about 7mm in the bore...Clive
The more you know, The better you know, How little you know
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
How-To: Feed Rate Calculation
By Lee Roberts in forum Machine DiscussionReplies: 20Last Post: 25-03-2020, 04:09 PM -
pulse equivelant calculation
By yasser in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 17-05-2016, 10:10 AM -
One ring to rule them all?
By Rufe0 in forum Gantry/Router Machines & BuildingReplies: 51Last Post: 27-01-2016, 04:15 AM -
Simple O-ring calculator.
By jcb121 in forum General ComputingReplies: 4Last Post: 26-07-2013, 09:00 PM -
how to measure a ring for cnc.
By crimsonred in forum Probing, Digitizing & ScaningReplies: 4Last Post: 27-09-2010, 02:47 PM
Bookmarks