Spindle help to EDING CNC

[JAZZCNC]

what is set in accel setting param f0.10 set it to high number to test try 20

[D-man]

what is set in accel setting param f0.10 set it to high number to test try 20

So wire up as per picture and change parameters you mentioned and also accel ?


Sent from my iPhone using Tapatalk Pro

[JAZZCNC]

So wire up as per picture and change parameters you mentioned and also accel ?


Sent from my iPhone using Tapatalk Pro

Yes if it starts then try lowering the Accel until it doesn't. Usually around 4-6 will work ok but depends on spindle.

[JAZZCNC]

Look slike you have no speed set so it's running but at Zero speed.

[D-man]

Look slike you have no speed set so it's running but at Zero speed.

Ok gimme a min to wire up as per pic


Sent from my iPhone using Tapatalk Pro