Thread: Spindle help to EDING CNC
Hybrid View
-
18-03-2017 #1
Hi again, just me. this time im in need of help controlling the spindle from my board. However ive never seen this VFD and the spindle looks like the 2.2kw but on steroids with a ER25 collet.
Can some good fellows help me control the spindle on/off via the board please?
VFD is https://halk.ru/forum/resources/8/download?version=8
and the model number is E380-4T0055G/0075P
Board im using is the EDING CPU5A4E
-
18-03-2017 #2
-
18-03-2017 #3
The black wire appears to be linking the CM and FWD terminals, as well as providing a common feed (probably to provide the common for switching the inputs).
You'll have to go through the settings menu (F3.0 - Pg32 in the manual) to see what X1, 2, & 3 have been configured to do.
The TA/TC is an output, again you'd have to check the settings to see what it's set to (F3.8 - Pg 32 again).
I'm not sure what Eding outputs, but you may want to reconfigure the drive so it uses an analogue 0-10V input to set the speed.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
18-03-2017 #4
Spindle is 3Kw.
-
19-03-2017 #5
Im sure it had 4.5 written on it. I may be wrong. But managed to get it all up and running now it's just the spindle I need sorting happy Sunday
https://youtu.be/nHRegkThV8w
Sent from my iPhone using Tapatalk
-
19-03-2017 #6
OK Guys, everything is as per the manufacturers settings (in parameters pages) APART FROM the following:
AUXILIARY RUNNING PARAMETER UNIT
F4.8 - 0.50
MULTI SPEED FREQUENCY
F5.1 - 100
F5.3 - 200
F5.4 - 250
F5.5 - 300
F5.6 - 350
F5.7 - 400
-
19-03-2017 #7
-
18-03-2017 #8
I will report back with these settings tomorrow.
Sent from my iPhone using Tapatalk Pro
-
19-03-2017 #9
Ok so when I put, X2 onto CM the VFD starts to spin up, however the spindle does not move and then I get an error code of FU.01 and it shuts down
https://youtu.be/VRlPxEhJO_E
Sent from my iPhone using TapatalkLast edited by D-man; 19-03-2017 at 03:38 PM.
-
19-03-2017 #10
At least we're getting somewhere.
Does the spindle spin by hand?Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Eding cnc controller
By Web Goblin in forum Items For SaleReplies: 4Last Post: 01-08-2016, 03:31 PM -
Eding cnc
By Ben-bee in forum CAD & CAM SoftwareReplies: 0Last Post: 17-05-2016, 08:48 PM -
Setting ADTECH servos with Eding CNC software steps/AppUnit
By D-man in forum Stepper & Servo MotorsReplies: 55Last Post: 24-04-2016, 02:50 PM -
CONVERSION: Sieg X2 super with ball screws and Eding CNC controle
By Soren DK in forum Conversion Build LogsReplies: 2Last Post: 11-04-2016, 08:40 PM -
Eding CPU5A4E controller and Siemens G110 VFD.
By calgone in forum EdingCNC (CPU5, CPU5A)Replies: 4Last Post: 06-02-2015, 11:31 PM
Bookmarks