Router Build number 2

[charlieuk]

thanks for spotting that i realised i hadn't modified the front for the motor to slide the rear is like this. I have left 5mm thickness. I like the idea of using grubs I was going to do something similar for the gantry but sounds like a good idea to do it all round and then like you say just bed everything with epoxy after that way you don't have to do all that sell leveling resin stuff. :)

I keep hearing dean say adjustment adjustment adjustment which I think is exactly right for diy stuff

all fixed will see if I can find some pullies to put on there but its the same as what I did on my other machine essentially so should be fine.