Thread: Roy's DIYCNC System 3 board
Hybrid View
-
24-03-2017 #1
Got a machine in for repair and it's fitted with one of Roy's System 3 board so looking for the PDF booklet on it if anyone has one.
Can't ask Roy as he's retired to Spain and sold out to R-Tech, the welding people but they have discontinued all the CNC parts.John S -
-
24-03-2017 #2
Now sorted, many thanks.
John S -
-
24-03-2017 #3
Hi John
I have just had a look here -
https://web-beta.archive.org/web/*/h...cnc.co.uk:80/*
see next to bottom file
found the system3 manual and a photo
for some reason I cant upload the manual !!!
I'l try and save the pages as jpegs
John
Last edited by john swift; 24-03-2017 at 02:01 AM.
-
24-03-2017 #4
John,
Thanks for that but after doing a bit of searching earlier on the same site I determined it was a System 4 but with only three cards fitted.
I now have about 5 copies of the various iterations of that System4 book.
Many thanks anyway.
Will have some more question is a fresh thread as this machine a Boxford 160 has a toolchanger fitted and it's been roughly converted to Mach3 [ one axis moves ] but it's lacking the tool changer macro.
However I need to do some homework for myself first and then if still stuck, start a new thead.John S -
-
24-03-2017 #5
Hi John
good to see you have found the information you needed
I've found the internet archive wayback machine use full several times when web sites I've searched for have closed
my reply still use full if it brings the archive to the attention other members here
John
-
24-03-2017 #6
-
The Following User Says Thank You to john swift For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Semi automatic welding system Linear beam control system
By richway in forum Projects, Jobs & RequestsReplies: 0Last Post: 24-01-2017, 08:54 PM -
Breakout Board expandability...CNCdrive based control system
By iforeman in forum General ElectronicsReplies: 16Last Post: 11-12-2016, 06:49 PM -
Setting up "System 45" 3 axis unit by DIYCNC
By StevenT in forum LinuxCNC (EMC)Replies: 2Last Post: 15-10-2014, 03:22 PM -
Additional info System 4 DIYCNC
By m.marino in forum Motor Drivers & ControllersReplies: 6Last Post: 15-02-2011, 02:04 PM -
Wiring in power and E-stop on DIYCNC Board
By m.marino in forum General ElectronicsReplies: 2Last Post: 10-05-2009, 10:15 AM
Bookmarks