DIY Pin Badge

[Boyan Silyavski]

Did you check the job request for aluminum badge?

[SignManTas]

Wal I love these too. Well done again and thanks for Sharing.



Sent from my iPhone using Tapatalk

[SignManTas]

Awesome .


Sent from my iPhone using Tapatalk

[Wal]

Evening all,

I made a few more of those brass Hi-Fi badges this weekend and thought I'd hot-glue my loupe onto the lens on my phone, you know, just to see. Slo-mo results below. The quality isn't super, so probably not worth wasting 3 minutes of your life on this, but I thought it at least entry-level interesting...



Cut using a 1mm, 2 flute carbide end-mill
DOC = 0.5mm
SPINDLE = 16K
Feed = 2.5mm/sec

[A_Camera]

Cool to watch. Mixing the arts of photography/video and CNC. I like it.

[the great waldo]

You'll have to pardon the French here...

I've been wanting to make myself a couple of badges for a while. Picked up some brooch backs off ebay and had a bash at making over the last few days. Results are good, I'm getting to grips a bit with the epoxy and polishing techniques, but it can still be a bit hit and miss.

Here's one I made - 3 tools: 2mm pocket, 1mm pocket and then a 0.5mm profile. Would have been nice to experiment with Fusion 360's REST machining feature here, but I'm not confident enough to switch to using it and in fairness, until I've worked out which parameters I can 'ignore' in 360 the Vectric software is a LOT more user friendly...



From 3D viz through to final badge. Of course, it's massively inefficient to make a load of badges this way, but as a one off the quality is great and it's always excellent to be able to make your own stuff..!

Wal.

Hi Wal

Will you be doing a Derek and Clive commemorative badge any time soon. Here is a link to one of my pre cnc guitars. Dremel Scalpel and piercing saw. I am still trying to get my head around all this cnc stuff, no valves in my control box.
http://www.tschuschenkapelle.at/images/Slideshow/4.jpg
By the way which cam software are you using? and where do you get your cutters.
Cheers from snow free Vienna

Andrew