Sure is, 10 mins away from me, free transport so it was a no brainier. it will have servos all round eventually but need to get the table sorted first so I can make it produce some parts.

The machine itself isn't bad, apart from the gantry has a 1mm shim at one end and poor facing where the gantry meets the sides. I will have to remove and skim both gantry and side and should be spot on.

I'm getting a little shaking side to side on the gantry also but I'm putting that down the my pendant not being setup properly as it doesn't do it when jogging with the keys.

I've had to get rid of that huge water table, it was causing vibration noise. So if anyone wants a stainless water table one here take it away it's about 30mm deep


Sent from my iPhone using Tapatalk Pro