New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Zeeflyboy]

Bit confused about what you are asking, what you linked to is literally just an inert container designed to hold oil and add it to a compressed air system to lubricate air tools.


You need a compressor, regulator (most compressors will have the regulator), an on/off switch (whether electronic solenoid or manual), and a nozzle. If you want mist, then really the best way to do it you will need two lines, one supplying coolant and one supplying air, ideally at different pressures (the coolant line only needs a very low pressure in my experience) and a mist coolant unit on the machine.

What you linked to wouldn't really be much use imo, the tank capacity is tiny - I use a 1 litre swimming pool filter container.