New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Desertboy]

I suppose I should start to think about power for the machine, I realise a 13 amp socket is not going to cut it lol.

2.2kw for the spindle
350w for the 24v power supply
100w's for misc
20% leeway

I thought sound this will be ok from a 13amp socket until I realised I need to power a vacuum cleaner at the same time. Also of course I need 1kw to boil the kettle for Tea ;)

So I have 2 choices
1. Run a 2nd 13 amp socket to the machine from the board.
2. Run a dedicated 32amp 5 wire 3 phase socket from the board (This is what I will do) and then tap 1 of the phases with a junction box to power the machine.