. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-11-2017 #11
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 2 Weeks Ago Has been a member for 8-9 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    Quote Originally Posted by AlexDoran View Post
    Looks ace mate good progress! Is there anything special needed in order to enable stall protection on the drivers? I have the same ones but only have them wired normally at the moment, remember seeing in the manual that it said it only works above 300RPM.

    I soldered my CY cable to the motor wiring, make it easier for me as i was going 8 wires into 4.

    Alex
    Just wire the output to the emergency input on your controller board then if it's missing a step the machine shuts down. You can see it's the 2 wires for stall protection next to the direction outputs on the AM882's.

    On my controller I had to wire them to a connector and then to the emergency input on my BOB as I have to cram 4 wires into 1 emergency socket, it's worse for the ground I have to cram at least 7 wires into 1 lol.
    Last edited by Desertboy; 01-11-2017 at 11:45 AM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 26 users browsing this thread. (0 members and 26 guests)

Similar Threads

  1. New Table Build, 12x6 work area, drawings up any advice?
    By silverdrgn in forum Plasma Table Machines
    Replies: 3
    Last Post: 23-01-2016, 07:34 PM
  2. BUILD LOG: My 1st Hybrid Steel/Ally (1150 x 850 work area) (comments/advice please)
    By lebies in forum DIY Router Build Logs
    Replies: 18
    Last Post: 19-08-2014, 12:00 PM
  3. BUILD LOG: Melbourne Andy CNC build 1220x810 work area
    By AndyGuid in forum DIY Router Build Logs
    Replies: 4
    Last Post: 20-04-2014, 08:25 PM
  4. RFQ: acetal parts turned lathe work
    By dazza in forum Projects, Jobs & Requests
    Replies: 10
    Last Post: 13-06-2013, 10:15 AM
  5. Wanted - Regular work for reliable machine shop in Northants/Kettering area
    By Narkedat90 in forum Opportunities Available & Sought
    Replies: 4
    Last Post: 06-04-2013, 04:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules