Quote Originally Posted by Nr1madman View Post
Just tought of something..
I'd you have the limitswitch like that and get some overshoot you will crush the switch ;)
I.e if the machine is on a rampage and go full speed into the side.. If you have the switch in a way so the machine will only touch the trigger but pass the housing of the switch it should stop in a few mm :D

Make any sense?

Skickat från min SM-N910C via Tapatalk
Yes that's a good point but the microswitches are cheap and hopefully will reduce the damage when 4mm later the gantry mount crashes into the BK12 fitting lol, I'll see what happens when I start running it I guess.

Should order a selection of button and lever microswitches so I have spares to play with only got 1 left at moment unless I rob the tat off the printer but they're just shit.