New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Desertboy]

Clamps are working nicely now ;)

Going to use Knurled head bolts so I can adjust tool free, will greatly reduce the time needed to set the clamps up.

These are for the T slot corners
https://www.ebay.co.uk/itm/M4x25mm-C...EAAOSw4HNaTqx1

These are for bolting into the frame of the cnc
https://www.ebay.co.uk/itm/282550095914

will slum it with A2's and an allen key until they arrive.

Also will change the 2020 on the bottom to 2040 this will let mill closer to the edge of the part

[Desertboy]

2 flute carbide end mill, what bit do I need to get a better finish (Ripping) or it speeds? This piece of wood is at least 60 years old mate found it in a pile of wood his dad bought in the 1950's at auction. This piece of wood was far from flat lol. This is only pocket clearing with no finishing pass.

Also ordered a few
https://www.ebay.co.uk/itm/262649813967

so I can have the most common collets I use fitted to save time when swapping tools.