Threaded View
-
29-08-2017 #11
Last Activity: 13-07-2023
Absolutely... you can theoretically detect around 15 seconds of arc with callipers that have 0.01mm resolution using a 100mm square.
That's about 0.004 degrees
If you nail it to within a couple of hundredth's of a mm then you have a pretty damn square machine. Depending on where I do the square on my machine mine it will be anywhere from about 0.02 to 0.09mm out iirc.Last edited by Zeeflyboy; 29-08-2017 at 04:58 PM.
-
The Following User Says Thank You to Zeeflyboy For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New Table Build, 12x6 work area, drawings up any advice?
By silverdrgn in forum Plasma Table MachinesReplies: 3Last Post: 23-01-2016, 07:34 PM -
BUILD LOG: My 1st Hybrid Steel/Ally (1150 x 850 work area) (comments/advice please)
By lebies in forum DIY Router Build LogsReplies: 18Last Post: 19-08-2014, 12:00 PM -
BUILD LOG: Melbourne Andy CNC build 1220x810 work area
By AndyGuid in forum DIY Router Build LogsReplies: 4Last Post: 20-04-2014, 08:25 PM -
RFQ: acetal parts turned lathe work
By dazza in forum Projects, Jobs & RequestsReplies: 10Last Post: 13-06-2013, 10:15 AM -
Wanted - Regular work for reliable machine shop in Northants/Kettering area
By Narkedat90 in forum Opportunities Available & SoughtReplies: 4Last Post: 06-04-2013, 04:09 PM
Bookmarks