. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 15-09-2017 #11
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 5 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 87 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Ok what does it say on the side of the transformer

    If the schematic that you have shown has come with the transformer then follow it.

    on the sec. side short yel and black together then red and orange go to the AC side of the rectifier.

    on the primary side short grey and violet together and connect the mains to brown and blue.

    Before you connect the caps up measure the voltage on the secondary side of the transformer (it should be around 50v AC) With the caps connected DC side it should be about 70v dc (DON'T TOUCH THE CAPS WHEN THEY ARE CHARGED as they will bite you) without a load on they will stay charged for a long time.
    Last edited by Clive S; 15-09-2017 at 05:07 PM.
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Clive S For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Table Build, 12x6 work area, drawings up any advice?
    By silverdrgn in forum Plasma Table Machines
    Replies: 3
    Last Post: 23-01-2016, 07:34 PM
  2. BUILD LOG: My 1st Hybrid Steel/Ally (1150 x 850 work area) (comments/advice please)
    By lebies in forum DIY Router Build Logs
    Replies: 18
    Last Post: 19-08-2014, 12:00 PM
  3. BUILD LOG: Melbourne Andy CNC build 1220x810 work area
    By AndyGuid in forum DIY Router Build Logs
    Replies: 4
    Last Post: 20-04-2014, 08:25 PM
  4. RFQ: acetal parts turned lathe work
    By dazza in forum Projects, Jobs & Requests
    Replies: 10
    Last Post: 13-06-2013, 10:15 AM
  5. Wanted - Regular work for reliable machine shop in Northants/Kettering area
    By Narkedat90 in forum Opportunities Available & Sought
    Replies: 4
    Last Post: 06-04-2013, 04:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules