New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Desertboy]

Just wait till I start wiring :D
Will need to mark everything to know what goes where!

Skickat från min SM-G955F via Tapatalk

It's not as bad as you think because by the time you have it wired you'll know every pin on that board better than you know the back of your hand lol.

The biggest pain is getting all the limit switches, Estop & 4 stall protection gnd's into the 1 socket that 1 wire barely fits it lol you also have to get 5 inputs into the Estop if you have stall protection. You also need to run 8 wires to your 5v on the BOB.

I have no idea what they are called but they are a godsend, look just under the BOB and on a bit of DIN rail I have those connectors. I found them in a scrap control box we have in the yard, the cable conduit was recovered as well with the din rail.

I see others on here using them maybe they can link you to what they're called they make the job a lot lot easier.