Hybrid View
-
30-11-2017 #1
I thought about that problem to!
Going to use wago connectors. Love them! At least the wago 222, not al that fond of the 221. Don't think the spring is as good!
Skickat från min SM-G955F via Tapatalk
-
30-11-2017 #2
https://www.ametherm.com/inrush-curr...h-current.html
This is where I found the info on the thermistor, I then checked the spec out on the part number for a 1kva transformer and sourced an equiv EU solution as it was £15 surcharge for ordering US stock from Farnell then there delivery charge for a sub £1 thermistor lol I bought 2 for £2 delivered.
Mine has a continuous current ratings of 5amp, I wonder what would happen if it tried to draw more than 5amp I assume it would fail due to overheating.Last edited by Desertboy; 30-11-2017 at 08:34 PM.
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
Thread Information
Users Browsing this Thread
There are currently 10 users browsing this thread. (0 members and 10 guests)
Similar Threads
-
New Table Build, 12x6 work area, drawings up any advice?
By silverdrgn in forum Plasma Table MachinesReplies: 3Last Post: 23-01-2016, 07:34 PM -
BUILD LOG: My 1st Hybrid Steel/Ally (1150 x 850 work area) (comments/advice please)
By lebies in forum DIY Router Build LogsReplies: 18Last Post: 19-08-2014, 12:00 PM -
BUILD LOG: Melbourne Andy CNC build 1220x810 work area
By AndyGuid in forum DIY Router Build LogsReplies: 4Last Post: 20-04-2014, 08:25 PM -
RFQ: acetal parts turned lathe work
By dazza in forum Projects, Jobs & RequestsReplies: 10Last Post: 13-06-2013, 10:15 AM -
Wanted - Regular work for reliable machine shop in Northants/Kettering area
By Narkedat90 in forum Opportunities Available & SoughtReplies: 4Last Post: 06-04-2013, 04:09 PM
Bookmarks